شروط الدفع والشحن:
|Type:||Y-Ball Valve||Nominal Pressure (MPa):||0.7|
|Diameter Range (mm):||DN65-500||Test Pressure (Mpa) seal:||1.0|
|Test Pressure(Mpa) intensity:||1.5||Test medium:||Water|
|Working pressure (Mpa):||< 1.0|
Automatic control Y-Ball Valve and Working pressure under 0.7 Mpa
|Nominal Pressure (MPa)||0.7|
|Diameter Range (mm)||DN65-500|
|Test Pressure (Mpa) seal||1.0|
|Test Pressure(Mpa) intensity||1.5|
|Working pressure (Mpa)||< 1.0|
|Working medium||Slurry, slag , tailing, etc|
Outstanding ball valve design of opening and closing, no blocking; creative opening and closing device control the valve by slurry pushing the ball.
1. SINOMTP wear – resistant rubber as the liners of Y– ball valve with 128% wear resistance index
2. Service lige is 2-4 times longer than traditional valve.
3. The ball wrapped by SINOMTP wear – resistant rubber which can effectively open and close the two valve ports in Y – ball valve.
4. Slurry flow driving ball into a pipe orifice and close it; slurry pass by another pipe orifice. So it will not cause blockage.